Bundle org.nuxeo.ecm.platform.pdf

Documentation

README.md
Nuxeo Platform PDF Utils

A set of utilities to deal with PDFs from a nuxeo application.

Operations

These operations can be used in Studio after importing their JSON definitions to the Automation registry.

A quick reminder: To get the JSON definition of an operation, you can install the plug-in, start nuxeo server then go to {server:port}/nuxeo/site/automation/doc. All available operations are listed, find the one you are looking for and follow the links to get its JSON definition.
- PDF: Add Page Numbers (id PDF.AddPageNumbers)
  - Accepts a Blob, returns a Blob
  - The input blob must be a PDF
  - The returned blob contains the page numbers, displayed using the parameters (position, font, ...)
    - Notice the input blob is not modified, a copy (+ page numbers) is returned
  - The following parameters let you tune the operation:
    - startAtPage (default: 1)
    - startAtNumber (default: 1)
    - position
      
      Can be Bottom right, Bottom center, Bottom left, Top right, Top center, or Top left
      Default: Bottom Right
    - fontName (default: Helvetica)
    - fontSize (default: 16)
    - hex255Color
      
      Expressed as either 0xrrggbb or #rrggbb (case insensitive)
      Default value: 0xffffff
    - password: If the PDF is encrypted, the password that will allow modification.
- PDF: Extract Pages (id PDF.ExtractPages)
  - Accept either a blob or a document as input
  - Returns a blob built with the extracted pages
  - If the input is a document, the xpath parameter must be used (default: file:content)
  - The following parameters let you tune the operation:
    - startPage
      
      If < 1 => realigned to 1
      If > endPage or > number of pages, a blank PDF is returned
    - endPage
      
      If > number of pages, it is realigned to the number of pages
    - fileName
      
      If not used, the filename will be the original file name plus the page range. For example, if the original name was "mydoc.pdf" and you extract pages 10 to 25, the resulting PDF will have a file name of "mydoc-10-25.pdf".
    - pdfTitle
      
      If not used, title is not set
      Warning: This is not the dc:title. It is the title as stored in the metadata of the PDF.
    - pdfSubject
      
      If not used, subject is not set
    - pdfAuthor
      
      If not used, author is not set
    - password: If the PDF is encrypted, the password that will allow extraction.
- PDF: Merge with Blob(s) (id PDF.MergeWithBlobs)
  - This operation merges all the blobs in a specific order (see below) and returns the final, merged PDF. Some properties (subject, ...) can also be set at the same time (optional)
  - The order of the PDF is the following:
    - Input blob
    - Blob referenced by the Context variable whose name is toAppendVarName
    - Blobs referenced as a BlobList by the Context variable whose name is toAppendListVarName
    - Blobs stored in the documents whose IDs are referenced as a String List by the Context variable whose name is toAppendDocIDsVarName
      
      The xpath parameter is used to get the blob in each document
      Optional. Default value is file:content
    - Important: The operation expects the Context variable names, not the values of the variables. For example in Studio, say you have a multivalued String field named myschema:the_ids. It stores IDs of documents (typically, filled by the user using a "Multiple Documents Suggestion Widget"). In an Automation Chain, to merge the PDF embedded in a these documents with an input blob you would write (see we use listArticles, not @{listArticles}):
```
. . . previous operations . . .
Set Context Variable
  name: listArticles
  value: @{Document["myschema:the_ids"]}
. . .
PDF: Merge with Blob(s)
  ..other parameters
  toAppendDocIDsVarName: listArticles
```
    - These parameters are optional. Still, you probably want to use at least one of them :-)
- PDF: PDF: Merge with Document(s) (id PDF.MergeWithDocs)
  - See the documentation of PDF: Merge with Blob(s)
  - The difference is that the input is a document. The operation extracts the blob from the xpath field. Notice that it is ok for this blob to be null, the operation will still merge all the other blobs referenced in the parameters
- PDF: Info to Fields (id PDF.InfoToFields)
  - Extract the info of the PDF and put them in the fields referenced by the properties parameter, return the modified document. If there is no blob or if the blob is not a PDF, all the values referenced in properties are cleared (set to empty string, 0, ...)
  - Parameters:
    - xpath: The xpath of the blob to handle in the document. Default value is file:content
    - save: If true, the document is saved after its fields have been populated
    - properties
      A key=value list (one key-value pair/line), where key is the xpath of the destination field and value is one of the following (case sensitive):
```
File name
File size
PDF version
Page count
Page size
Page width
Page height
Page layout
Title
Author
Subject
PDF producer
Content creator
Creation date
Modification date
Encrypted
Keywords
Media box width
Media box height
Crop box width
Crop box height
Can Print
Can Modify
Can Extract
Can Modify Annotations
Can Fill Forms
Can Extract for Accessibility
Can Assemble
Can Print Degraded
```
    The permission fields (starting with "Can ...") contain "true" or "false". Every field is "true" if the document is not encrypted or is opened with the owner password.
    - For example, say you have an InfoOfPDF schema, prefix iop, with misc. fields. You could write:
```
iop:pdf_version=PDF version
iop:page_count=Page count
iop:page_size=Page size
...etc...
```
- PDF: Watermark with Text (id PDF.WatermarkWithText)
  - Accepts a Blob, returns a Blob
  - Returns a new blob combining the input PDF and the watermark text set on every pages, using the different properties.
  - If watermark is empty, a simple copy of the input blob is returned
  - properties is a key=value set where key can be one of the following. When not used, a default value applies:
    - fontFamily (default: "Helvetica")
    - fontSize (default: 36.0)
    - rotation (default: 0)
    - hex255Color (default: "#000000")
    - alphaColor (default: 0.5)
    - xPosition (default: 0)
    - yPosition (default: 0)
    - invertY (default: "false")
  - More details about some properties:
    - xPosition and yPosition start at the bottom-left corner of each page
    - alphaColor is a float with any value between 0.0 and 1.0. Values < 0 or > 1 are reset to the default 0.5
- PDF: Watermark with Image (id PDF.WatermarkWithImage)
  - Accepts a Blob, returns a Blob
  - Returns a new blob combining the input PDF and an image set on every page (using the x, yand scale parameters)
  - The image to use for the watermark can be one of the following:
    - imageContextVarName: A Context variable which references a Blob containing the image.
    - imageDocRef: The path or the ID of a document whose file:content field contains the image to use
      
      Notice: If imageDocRef`` is used, an UnrestrictedSession` fetches its blob, so the PDF can be watermarked even if current user has not enough right to read the watermark itself.
    - Notice: The operation first checks for imageContextVarName.
  - x and y start at the bottom-left of the page
  - Dimensions of the image will be * by scale (so 1.0 means "Original size", 0.5 means half the size. 4 means four time the size, ...)
- PDF: Watermark with PDF (id PDF.WatermarkWithPDF)
  - Accepts a Blob, returns a Blob
  - Returns a new blob combining the input pdf and an overlayed PDF on every page
  - The PDF to use for the watermark can be one of the following:
    - pdfContextVarName: A Context variable which references a Blob containing the PDF.
    - pdfDocRef: The path or the ID of a document whose file:content field contains the PDF to use
      
      Notice: If pdfDocRef`` is used, anUnrestrictedSession` fetches its blob, so the PDF can be watermarked even if current user has not enough right to read the watermark itself.
    - Notice: The operation first checks for pdfContextVarName.
  - This operation uses PDFBox to overlay the PDF. The count of pages in each PDF can be different. Basically, the PDF to overlay will be repeated over the PDF to watermark. So for a final PDF of 10 pages:
    - If the overlay has one single page, this page is overlayed on the 10 pages
    - If the overlay has 3 pages, then the overlay will be made with pages 1 2 3 1 2 3 1 2 3 1
- PDF: Encrypt Read Only (id PDF.EncryptReadOnly)
  - Accepts Blob, Blobs, Document, Document(s)
  - Encrypts the PDF in readonly mode: User can print, copy, print degraded, extract info for accessibility, but cannot assemble, modify, modify annotations.
  - Returns a new blob, copy of the original one, but encrypted
  - Parameters:
    - originalOwnerPwd: If the PDF is already encrypted, the password to open and modify it
    - owenrPwd; The new password to use for encryption. An owner can do everything on the PDF. If not passed, we use originalOwnerPwd
    - userPwd: The password for users, who will have restriction (read only) on the PDF
    - keyLength: The length to use for the encryption key. Possible values are 40 and 128. If no value is passed, 128 is used
    - xpath: If the input is Document or Documents, the field where to get the blob from (file:content by default)
- PDF: Encrypt (id PDF.Encrypt)
  - Accepts Blob, Blobs, Document, Document(s)
  - Encrypts the PDF with the permissions given in permissions
  - Returns a new blob, copy of the original one, but encrypted
  - Parameters:
    - originalOwnerPwd: If the PDF is already encrypted, the password to open and modify it
    - owenrPwd; The new password to use for encryption. An owner can do everything on the PDF. If not passed, we use originalOwnerPwd
    - userPwd: The password for users, who will have restriction (read only) on the PDF
    - keyLength: The length to use for the encryption key. Possible values are 40 and 128. If no value is passed, 128 is used
    - xpath: If the input is Document or Documents, the field where to get the blob from (file:content by default)
    - permissions is a key=value set where key can be one of the following. When not used, false is applied (permission to do the action is denied):
    - print
    - modify
    - copy
    - modifyAnnot
    - fillForms
    - extractForAccessibility
    - assemble
    - printDegraded
    So for example, if you pass...
```
print=true
copy=true
```
    ... the user will only be able to print and copy.
- PDF: Remove Encryption (id PDF.RemoveEncryption)
  - Accepts Blob, Blobs, Document, Document(s)
  - Remove the encryption
  - Returns a new blob, copy of the original one, not encrypted at all.
  - If the PDF already was encrypted, the operation still returns a copy of it (not the orginal blob)
  - Parameters:
    - wnerPwd: Password to use to decrypt and remove the permissions
    - xpath: If the input is Document or Documents, the field where to get the blob from (file:content by default)
- PDF: Get Links (id PDF.GetLinks)
  - Accepts Blob
  - Returns a JSON String containing an array of objects. Each object has the following fields:
    - page: The page number where the link is
    - subType: The subType of the field. This is PDFBox (underlying java tool used to handle the PDF) label. It can be one of the following: Launch, GoToR or URI.
    - text: The text of the link
    - link: The link itself (depending on subType)
  - Parameters
    - type: One of the following (case insensitive):
      
      Launch
      Remote Go To
      URI
    - getAll: If true, the operation returns a list of all the links (of category Launch, Remote Go To or URI)
    - Important: If getAll is false, type must be filled (or an error will occur)
- Conversion > PDF: Convert to Pictures (id PDF.PDFToPictures)
  - Accepts a Document
  - Parameters:
    - fileName (default: PDF file name)
      This name will be applied to each image as fileName + page number + .png. Optional
    - xpath (default: file:content)
      The path to the PDF blob. Optional
    - password
      Password to unlock the PDF if required. Optional
  - Returns a Blob List of each page of the PDF as PNG image
  - These images can be used for OCR with Nuxeo Vision, for example
Licensing

Apache License, Version 2.0

About Nuxeo

Nuxeo dramatically improves how content-based applications are built, managed and deployed, making customers more agile, innovative and successful. Nuxeo provides a next generation, enterprise ready platform for building traditional and cutting-edge content oriented applications. Combining a powerful application development environment with SaaS-based tools and a modular architecture, the Nuxeo Platform and Products provide clear business value to some of the most recognizable brands including Verizon, Electronic Arts, Sharp, FICO, the U.S. Navy, and Boeing. Nuxeo is headquartered in New York and Paris. More information is available at www.nuxeo.com.

Resolution Order

[449, 450]

The resolution order represents the order in which components have been resolved by the Nuxeo Runtime framework. This range represents the minimal and maximal orders for this bundle's components.
You can influence this order by adding "require" tags in the component declaration, to make sure it is resolved after another component. It will also impact the order in which contributions are registered on their target extension point (see "Registration Order" on contributions).

Components

Maven Artifact

File	nuxeo-platform-pdf-utils-2023.22.13.jar
Group Id	org.nuxeo.ecm.platform
Artifact Id	nuxeo-platform-pdf-utils
Version	2023.22.13

Manifest

Manifest-Version: 1.0
Archiver-Version: Plexus Archiver
Created-By: Apache Maven 3.9.6
Built-By: root
Build-Jdk: 17.0.12
Bundle-ManifestVersion: 2
Bundle-Version: 1.0.0
Bundle-SymbolicName: org.nuxeo.ecm.platform.pdf;singleton:=true
Bundle-Name: nuxeo-platform-pdf-utils
Bundle-ClassPath: .
Bundle-ActivationPolicy: lazy
Bundle-RequiredExecutionEnvironment: JavaSE-1.7
Bundle-Vendor: Nuxeo
Nuxeo-Component: OSGI-INF/pdf-utils-operations.xml,OSGI-INF/service-cont
 rib.xml

Exports

Json Export Default Json serialization
Json Graph Json dependency graph
Json Contribution Stats Json statistics for contributions
CSV Contribution Stats CSV statistics for contributions

Charts

Raw Data: Json Contribution Stats

Contributions by Code Type

Loading data

Contributions by Target Extension Point

Loading data

Contributions by Studio Source

Loading data